Pole Dancing Lessons and equipment sales

X-POLE is the fastest selling dance pole in world with good reason!
Featuring some of the most advanced engineering you'll find in the world of pole exercise & dance, X-POLE has been developed in consultation with the world's best dancers, to meet the demands of professional pole dancing.
X-POLE is one of the most affordable QUALITY poles available worldwide.

X-POLE Complete Sets - Everything you need!
The NEW complete X-POLE sets include
your precision engineered X-POLE, which now comes standard with the superb new carry cases, custom designed to carry your X-POLE & it's extensions - maximum protection and portabilty!

This means that you will now get your complete X-POLE set,
2 free extensions, Pole safety DVD, Tools, the new
custom carry cases, & courier delivery to your door.

Study the following 16 steps pictorial which show you how to go about safely installing the X-Pole in your home. More detailed instructions are also available on the DVD and in the instruction Manual.

X-Pole - 50mm Set Chrome $299.99	BUY NOW
X-Pole - 50mm Set Titanium Gold (TG) $339.99	BUY NOW

Shipping and handling is $40.00 per unit delivered Fed-Ex ground. Charges added upon checkout.



Step 1 - Check the contents Remove all the parts from the box, lay them out, identify them and check the contents.	Step 2 - Choose a Pole location Select the pole location, measure the ceiling height and place the base in postion.

Step 3 - Choose your extensions Use the height chart to select any extensions (if required).	Step 4 - Locate the ceiling joists Locate the ceiling joists by tapping with a finger or using a stud/joist locator. Adjust the base position to mid point between the joists.

Step 5 - Fit the extensions to the base (if required) Attach any extensions to base insert. Extensions always fit at the bottom of the pole smallest first.	Step 6 - Attach lower main pole. Screw the lower main pole onto the extension or base insert. Tighten firmly by hand.

Step 7 - Prepare Adjuster rod Take off the adjuster cover tube and wind the adjuster locking nut to the top of the adjuster.	Step 8 - Fit adjuster Screw the adjuster into upper main pole until the nut touches the top of the pole.

Step 9 - Fit adjuster cover Slide adjuster cover into position just covering the O-ring.	Step 10 - Attach the Upper Dome Slide the upper dome onto adjuster shaft. X-Pole uses a long adjuster shaft with 3 bearings to lock the dome at 90 degrees to the Pole.

Step 11 - Fit the poles together Attach upper pole assembly to lower pole. Screw up tightly and hold vertical.	Step 12 - Tighten Adjuster Unscrew the adjuster by hand until it is firm against the ceiling. Make sure the upper dome is flat.

Step 13 - Tighten the tubes Using the tightening and release rods tighten the pole sections firmly but not over tight.	Step 14 - Final check Tighten pole adjuster with spanner until it is really firm. Check for movement and retighten if there is any movement.

Step 15 - Fit adjuster Cover Slide the adjuster cover up, press in the two sprung pins and lock in place	Step 16 - Ready to go! After a final check for movement X-pole is ready for use. Where ever it's used X-Pole is up and ready for action in minutes.

WORKSHOPS AVAILABLE!

Pole Champ Workshops are available anywhere in the US! ANYONE can book a 3 hour workshop at your location or mine for as little as 3 attendees! This is great for a small group of women or a large studio! Fill out a contact form or call 1-888-892-7927 to get started today!

APPEARANCES AVAILABLE!

Pole Champ is available for performances anywhere in the US. Fill out a contact form or call 1-888-892-7927 to request an appearance by one of America's most famous Pole Dancers! Add a workshop to the appearance and get a discount!

Upcoming Classes

FREE Newsletter

WORKSHOPS AVAILABLE!

APPEARANCES AVAILABLE!